上卸料沉降離心機 | PSC series | |
| PSC系列離心機用途廣泛，尤其適用于離心過濾中因固體顆粒易堵塞過濾介質而過濾阻力過大時或細顆粒漏失過多時的懸浮液分離。該沉降離心機可用于結晶、化學沉淀物、煤粉等懸浮液的分離、各種污水污泥的脫水以及動植物油的除渣澄清等領域。 | PSC series centrifuge especially suit for separation of float liquid:1）has particles easily jammed;2）has tiny particles leak too many.Application field:crystal,chemical sediment,coal powder,wastewater,sludge,animal fats and vegetable oils. |
◎工作原理 | | |
| 沉降式離心機的轉鼓壁上無孔，待分離物料由進料管進入高速旋轉的離心機轉鼓，在離心力場的作用下形成環狀液層，其中的固體顆粒沉降到轉鼓壁上，形成沉渣。澄清的液體經過吸液管排出。分離結束時用人工或機械方法卸出沉渣。 | Floating liquid come into drum trough feed tube,centrifugal force field makes solid phase decanting on drum wall forms residues.Clarified liquid discharge trough priming tube.After separation,discharge residues by human or by machinery. |
◎主要特點 | | |
| 1、轉速相對較高，分離因數大。 2、與物料接觸為不銹鋼，耐腐性能好。 3、設備主要零件表面均采用精密拋光處理。 4、維護方便快捷。 | 1）Promoted rotating speed and separation factor. |
◎結構示意圖(Structure schematic diagram)
◎主要材料 | ◎Composition of critical parts | |
| 1、平板為Q235A包襯不銹鋼。 2、轉鼓部件除轉鼓底為鑄鐵包襯不銹鋼外其余全部采用不銹鋼。 3、機殼、機蓋包括附屬品全部采用不銹鋼。 4、軸承座采用鑄鋼件(ZG230-450)包襯不銹鋼。 | 1）Flat plate is made of Q235A carbon steel coated by stainless steel. 2）Drum base is made of cast iron coated stainless steel,other parts of drum is fully stainless steel. 3）Shell,top lid and belongings are made of stainless steel. 4）Bearing pedestal is made of cast iron（ZG230-450）coated stainless steel. |
◎結構與配置(Structure and configuration)
| 項目(Item) | 標準(Ordinary ) | 可選(Alternatives) |
| 整機結構 (Whole machine set) | 平板式結構 Flat plate | |
| 轉鼓與物料接觸部分的材質 (Drum contact with material part’s composition) | SUS304不銹鋼 SUS304 stainless steel | SUS316、316L、321不銹鋼、鈦材、襯塑、襯HALAR、襯膠等 Stainless steel:SUS316,SUS316L,SUS321;titanium;lining plastic;lining HALAR;lining rubber;etc. |
| 上蓋結構 (Top lid) | 無蓋 Without lid | 小翻蓋 Reversible small lid |
| 上蓋附件 (Top lid belongings) | 進料管、視鏡、防爆燈、料位探測器 Feed tube,observation hole,explosion-proof lamp,material position detector | |
| 布料方式 (Distribution method) | 人工 manual | 側向布料 Side distribution |
| 出液方式 (Liquid discharge) | 抽吸裝置 By suction device | |
| 電機種類 (Motor type) | 普通電機 Ordinary | 變頻電機、防爆電機、節能電機 frequency-alterable,explosion-proof or energy saving |
| 制動方式 (Braking method) | 能耗制動 Dynamic braking | 手動剎車、回饋制動 Manual braking,feedback braking |
| 操控系統 (Controlling system) | 變頻、手動 frequency-alterable,manual | PLC+HMI人機界面 PLC+HMI |
| 安全防護(Safety technologies) | 振動保護、機電聯鎖保護、電機防護罩、過載過熱保護 Over vibration,electromechanical interlock,motor shield,overload,overheat | 轉速顯示 Speed display |
| 卸料方式 (Discharge method) | 人工 manual | |
| 清潔處理 (Cleaning) | 人工 manual | 在線清洗結構 Online washing |
| 其他 (Others) | | 其他配置要求 |
◎技術參數(Technical parameters)
采購中心
