TDA-110P自動過濾檢測儀
TDA-110P全自動過濾器測試儀采用zui高/新技術來測試zui高達400立方英尺每分鐘中等流量的空氣過濾器。它是高速成長的ATI模塊化過濾器測試系統包括低流量TDA-100P系列和高流量
TDA-110P全自動過濾器測試儀
英文詳細介紹
Description
The TDA-110P Automatic Filter Tester is a state-of-the-art system for testing medium-flow air filters up to 400 cubic feet per minute （CFM）. It is part of the growing ATI family of Modular Automatic Filter Testers which includes the low-flow TDA-100P series and the high-flow TDA-120P series testers. The TDA-110P is ideal for testing automotive and airline cabin-air filters, vacuum filters, industrial or commercial ventilation filters, compressed air filters, collective protection military filters, and many other types of medium-flow air filters.
Features
The TDA-110P automatically measures the aerosol penetration, filter resistance, and the test flow of the filter. The filter holder assembly is customized to meet your specific needs, and once the filter is placed into the test fixture, the testing sequence is quick and fully automatic. Filters up to 24 inches by 24 inches square can be tested on the TDA-110P, and customized adapter plates can be provided for the full range of filter configurations that you will be testing. Using a highly stable and repeatable oil-based aerosol challenge and a photometric detection system, the TDA-110P provides reliable filter efficiency readings up to 99.9995 percent. （Filter penetrations down to 0.0005 percent） This extraordinary span allows for accurate tests of medium-flow filters HEPA and even ULPA media.
The Operator controls the entire testing process through 4-user-friendly function keys. User-programmed filter testing parameters and alarm points are selected using the function keys and test data is managed through the built-in microprocessor. Test results can be output through a RS-232 serial port to a user-supplied computer, or through a user interface port to ancillary control/monitoring equipment.
Although the TDA-110P has extensive built-in functionality, every unit is built to order and a wide variety of optional features can be included. ATI will thoroughly review your filter requirements before configuring and recommending a system to meet your specific needs.
Specifications
AEROSOL GENERATION
Technique: Pneumatic nebulization using DOP or PAO
Diameter: 0.18 µ CMD
Geometric Standard Deviation: <1.6
Concentration: 60 milligrams per cubic meter （mg/m³）
AEROSOL DETECTION
Technique: Near forward light scattering
Accuracy: ± 1%
Sample Flow Rate: 1 cubic foot per minute from the sample stream
FILTER TEST FLOW MEASUREMENT
Technique: Mass Flow meter
Range（*）: 40 to 400 cubic feet per minute @ 21.1º C, 760 mm Hg
PRESSURE MEASUREMENT
Technique: Electronic pressure transducer
Accuracy: ± 0.5% of full scale
Range（*）: 0 to 100 millimeters water column
（0 to 3.94 inches water column）
EFFICIENCY MEASUREMENT
Flow Rate Through Filter: 40 to 400 cubic feet per minute
Operating Range: Efficiencies to 99.9995%
OPERATIONAL REQUIREMENTS AND PHYSICAL CHARACTERISTICS
Power: 208 VAC, 3 phase, 60 Hertz, 15 Amps
Compressed Air: 10 scfm @ 80 psig
Size: 22 feet wide by 5 feet deep by 9 feet high
*Note: Can be configured to customer requirements.
Benefits:
- Ease of Use
- Wide Flow Range
- Multiple Filter Configurations
- Every System Customized
- Fast Cycle Times
- Ergonomic Design
- Reliable and Repeatable
- User Programmable Parameters
- RS-232 Serial Data Output
- Optional User Interface Port
1, TDA-110P全自動過濾器測試儀產品特點:
1.1 全自動的
1.2 故障報警指示
1.3 多項參數同時測試
2, TDA-110P全自動過濾器測試儀產品應用:
2.1 HEPA過濾器
2.2 ULPA過濾器
2.3 通風過濾器
2.4 壓縮空氣過濾器
3, TDA-110P全自動過濾器測試儀產品簡介
TDA-110P全自動過濾器測試儀采用zui高/新技術來測試zui高達400立方英尺每分鐘中等流量的空氣過濾器。它是高速成長的ATI模塊化過濾器測試系統包括低流量TDA-100P系列和高流量
TDA-120P系列高效器的一部分。TDA-110P全自動過濾器測試儀是理想的測試汽車和飛機客艙空氣過濾系統過濾器，真空過濾器，工業和商業通風過濾器，壓縮空氣過濾器，集體防護軍用過濾器和許多其它種類的中等流量的空氣過濾器效率測試儀。
TDA-110P全自動過濾器測試儀自動的測量懸浮粒子的穿透率，過濾器阻力和過濾器測試時流量。過濾器夾具可以根據客戶的要求定做，一旦過濾器放上測試夾具，它的測試程序是迅速的并且*的自動化的。高達24英寸X24英寸面積能被用來測試，并且定制適配板能被提供整個范圍的過濾器配置。用一個高穩定的和高重復性的基于油的懸浮粒子和一個光度偵測系統，
TDA-110P全自動過濾器測試儀提供高可靠過濾器效率讀數高達99.9995%（過濾器的穿透率在0.0005%）。這么大的空間允許精準的流速中等流速HEPA（高效過濾器）甚至ULPA（超高效過濾器）。
操作員控制整個系統通過4個用戶友好的功能鍵。用戶編程的過濾器測試參數和報警點通過內置的微處理器選擇用功能鍵和測試參數管理。測試結果能被輸出通過RS-232串口到用戶供應的電腦,或通過用戶界面去輔助控制/監控設備.
4, 技術參數:
空氣懸浮粒子產生:
技術; DOP或PAO油氣動霧化
直徑: 0.18微米的CMP（符合42 CFR Part 84）
幾何標準偏差: 小于1.6（符合42 CFR Part 84）
濃度; 50微克每立方米
懸浮粒子的檢測:
技術: 近距離的前向光散射\
精確度; +/- 5%
取樣流速: *的通過檢測器, 10到100標準升每分鐘
過濾器測試流速計量:
技術: NIST 可追溯的質量流量計
重復性; +/- 5%滿量程
范圍: 40到400標準升每分鐘在溫度21.1℃
壓力760 mm Hg條件下
壓力測量:
技術: 電子壓力傳感器
準確度; +/- 5%滿量程
范圍: 0-100毫米貢柱
效率測量:
通過的流速: 40-400立方英尺每分鐘
操作范圍: 效率zui高到99.9995%
操作需求及物理特性:
電源: 208VAC, 3相, 60Hz, 15A
壓縮空氣: 10標準立方英尺每分鐘在80PSI
尺寸: 16英尺×（寬）×5英尺（深）×9英尺（高）
采購中心
