概述 Descriptions
該系列容器適用于制藥行業的濃/稀配之用，罐體設有夾層，可加熱、冷卻、內表面采用電解鏡面拋光，封頭(錐形)均經旋壓加工、符合GMP標準，攪拌裝置采用衛生級機械密封，容器保，溫采用聚氨酷或珍珠棉，接口采用國際標準快裝卡箍式，方便衛生，渡邊經旋壓加工，外表面采用拋光、噴砂、磨砂或冷軋?jiān)珕」獾榷喾N形式，使容器在任何場地都能顯示它的品質。設備配備空氣呼吸孔，CIP清洗噴光、視鏡法蘭快開式人孔等裝置。
This series of containers are suitable for thick/thin mixing in the pharmaceutical industry The tank body is provided with an interlayerwhich can be heated. cooled, and the inner surface is polished by electrolvtic mirror surface. The head (cone) is spun to conform toGMP standard. The stiring device adopts sanitary mechanica seal, and the container is kept warm by polyurethane or pear cotonThe interface adopts international standard quick-fitting clamp type, which is convenient and sanitary. The watanabe is spun, and theouter surtace adopts polishing, sandlasting, trosting or col-roling primary color mate and other torms, so that the container candisplay its excellent quality in any site. The equipment is equipped with air breathing holes, ClP cleaning and light spraying, mirrorflange quick opening manhole and other devices.
根據貯存能力不同由1000-15000L，貯罐能力在20000以上的購罐，建議使用室外貯罐，貯罐使用SUS304不銹鋼制成，根據罐類設計要求可附帶裝置如下:攪拌器/進、出料口/人孔/溫度計/液位指示器/高、低液位報警孔/防蠅、防塵呼吸氣孔/計量器
According to different storagecapacities，outdoor storagetanks are recommended forstorage tanks with a storagecapacity of 1,000-15,000 L andabove 20,000 LThe storagetanks are made of SUS304stainless steel.According totank design requirements， thefollowing devices can beattached:Agitator/inlet/outlet/manhole/thermometer/liquid levelindicator/high/low liquid levelalarm hole/fly-proof，dust-proofbreathing air hole/meter
采購中心
