進口立式管道泵英國立式管道泵

進口立式管道泵

進口管道泵 英國進口管道泵pipeline pump

進口立式管道泵產品概述Product overview:
立式管道泵是英國格林推出的新型管道泵系列產品，它同類產品的長處，產品采用水力模型，可不用聯軸器直接插入泵軸內孔，具有結構新穎*，又緊湊低噪，高效節能，堅固耐用，維修方便等優點，型譜覆蓋范圍廣，在有些場合可替代端吸型離心泵。

進口立式管道泵產品特點Product features:
1、泵為立式結構，進出口口徑相同，且位于同一中心線上，可象閥門一樣安裝于管路之中，外形緊湊美觀，占地面積小，建筑投入低，如加上防護罩則可置于戶外使用。
2、葉輪直接安裝在電機的加長軸上，軸向尺寸短，結構緊湊，泵與電機軸承配置合理，能有效地平衡泵運轉產生的徑向和軸向負荷，從而保證了泵的運行平穩，振動小、噪音低。
3、軸封采用機械密封或機械密封組合，采用進口鈦合金密封環、中型耐高溫機械密封和采用硬質合金材質，耐磨密封，能有效地延長機械密封的使用壽命。
4、安裝檢修方便，無需拆動管道路系統，只要卸下泵聯體座螺母即可抽出全部轉子部件。
5、可根據使用要求即流量和揚程的需要采用泵的串、并聯運行方式。
6、可根據管路布置的要求采用泵的豎式和橫式安裝。
工作條件:
1、吸入壓力≤1． 0MPa，或泵系統zui高工作壓力≤1．6MPa，即泵吸入口壓力+泵揚程≤1．6MPa，泵靜壓試驗壓力為2．5MPa，訂貨時請注明系統工作壓力。泵系統工作壓力大于1．6MPa時應在訂貨時另行提出，以便在制造時泵的過流部分和聯接部分采用鑄鋼材料。
2、環境溫度<40℃，相對濕度<95％。
3、所輸送介質中固體顆粒體積含量不超過單位體積的0．1％，粒度<0．2mm。
注：如使用介質為帶有細小顆粒，請?jiān)谟嗀洉r說明，以便廠家采用耐磨式機械密封。

進口立式管道泵設計標準與主要材料Design standard and the main material 　
　
設計標準:性能根據歐洲BS EN733 / DIN24255標準
結構:立式、單級、單吸、蝸殼式、管道式
出口直徑:mm） 40 - 200
法蘭標準 標準配置：ANSI B16.5 Class 150lb；可選配置： DIN2501 
泵體 標準配置：鑄鐵HT200；可選配置：球鐵QT400-18
葉輪 標準配置：黃銅H 65；可選配置：鑄鐵HT200、不銹鋼304/316
軸 標準配置：不銹鋼2Cr13；可選配置：不銹鋼304/316、45#鋼
軸封 標準配置：機械密封(Carbon-Sic/Viton)
　 　 　
進口立式管道泵技術參數Technical parameters 　 　
zui大流量 600 m3/h
zui高揚程 155m
額定轉速 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ)
額定溫度 -10 Celsius to 105 Celsius 
zui大工作壓力 1.6 MPa

進口立式管道泵應用Application 　 　
　 　 　
HVAC加熱設備、通風設備、空調設備、消防、水流循環、液體傳送、冷卻、農業灌溉、增壓

進口立式管道泵guan網：http://www.twvalve。。ｎｅｔ/html/3121.html

Vertical pipe pump

Imported pipeline pump imports pipeline pump

Introduction of imported vertical pipeline pump products Product overview:

Vertical pipeline pump is a series of new product pipeline pump Green of Britain's new, its international similar products strengths, products using hydraulic model, can be directly inserted into the inner hole of the pump shaft coupling, with novel structure and compact, low noise, high efficiency and energy saving, durable, convenient maintenance, covering a wide range of spectrum instead, end suction type centrifugal pump in some occasions.

Imported vertical pipeline pump product features Product features:

1, the pump for the vertical structure, import and export of the same caliber, and in the same center line, which acts like a valve in the pipe installation, compact appearance, small footprint, low construction investment, such as protective cover can be placed outdoors.

2, the impeller mounted directly on the extension of the motor shaft, short axial size, compact structure, pump and motor bearings reasonable configuration, can effectively balance the pump functioning of the radial and axial load, so as to ensure the smooth operation of the pump, small vibration, low noise.

3, seal with mechanical seal or mechanical seal combination of imported titanium alloy sealing ring, medium and high temperature mechanical seal with carbide materials, wear-resistant sealing, can effectively prolong the service life of mechanical seal.

4, easy installation and maintenance, no need to remove the pipe road system, as long as the pump can be removed from the whole body of the nut nut.

5, according to the requirements of the use of flow and lift the need to use the pump string, parallel operation mode.

6, according to the requirements of piping layout using the vertical and horizontal pump installation.

Working conditions:

1, suction pressure is less than 1.0MPa, or pump system maximum working pressure is less than 1.6MPa, the pump suction pressure + pump head is less than or equal to 1.6MPa, static test pressure to pump 2.5MPa, please specify when ordering the system working pressure. When the pump system working pressure is greater than 1.6MPa should be put in order, in order to make the pump when the flow part and the connection part of cast steel material.

2, ambient temperature <40 DEG C, relative humidity <95%.

3. The volume content of solid particles in the medium is not more than 0.1% of the volume, and the particle size is <0.2mm.

Note: such as the use of medium with small particles, please specify when ordering, so that manufacturers use wear-resistant mechanical seal.

Design design standard of imported vertical pipeline pump and main standard and the main material material

Design criteria: performance according to European BS EN733 / DIN24255 standards

Structure: vertical, single-stage, single suction, volute type, pipe type

Outlet diameter: mm) 40 - 200

Flange standard standard configuration: ANSI B16.5 Class 150Lb; optional configuration: DIN2501

The pump body standard configuration: HT200 cast iron; optional configuration: ductile iron QT400-18

The impeller standard configuration: 65 optional configuration: H brass; cast iron HT200, stainless steel 304/316

Standard configuration: 2Cr13 stainless steel shaft; optional configuration: 304/316, stainless steel 45#

Standard configuration: seal mechanical seal (Carbon-Sic/Viton)

Imported vertical pipeline pump technical parameters of Technical parameters

The maximum flow rate of 600 m3/h

The maximum lift 155m

The rated speed of 1450~2900 RPM (50HZ), 1750~3500 RPM (60HZ)

-10 Celsius to rated temperature of 105 Celsius

The maximum working pressure of 1.6 MPa

Imported vertical pipeline pump using Application

HVAC heating equipment, ventilation equipment, air conditioning equipment, fire fighting, water circulation, liquid transfer, cooling, agricultural irrigation, pressurization

Imported vertical pipe pump Guan net: http://www.twvalve。。ｎｅｔ/html/3121.html

英國格林代理商上海凡而閥門有限公司，咨詢：

英國格林相關領域業績：杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線，南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。

帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。

Green field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.