德國MENZEL顯微鏡載玻片

德國MESOMATIC稱重終端 測量放大器

德國MENZEL顯微鏡載玻片

德國maple systems平板電腦

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。
 

本公司供應電工電器成套設備的mawomatic GmbH氣動開關；壓力傳感器；紅外傳感器，*，歡迎洽談。

mawomatic GmbH氣動開關；壓力傳感器；紅外傳感器；開關；傳感器

mawomatic GmbH提供精密測量和控制解決方案；是空氣測量技術的合作伙伴。
能測量空氣噴射、 PEL 切換，PEL 模擬轉換器設備、 主部件、 計算器、 軟件組件、 模塊。
MAWOMATIC GmbH位于德國，是生產的自動化控制和測量應用氣動元件-模塊-系統一體化的公司。

常用型號：
mawomatic GmbH mawomatic APA1.AA10PC
mawomatic GmbH mawomatic APA6.PC
mawomatic GmbH valve APA6.CP
mawomatic GmbH Pressure sensor APA1 AA10
mawomatic GmbH mawomatic APA1.AA10 CP 00 -578-799
mawomatic GmbH connector APA1.AA10PC
mawomatic GmbH Pressure Switch APA1AA07PC

LUFTMESSTECHNIK

Luftmesstechnik und seine besonderen Vorteile:
Die Luftmesstechnik basiert auf dem Prinzip der Staudruckmessung. Wo immer ein Staudruck aufgebaut werden kann, ist dieses Messprinzip anwendbar. Die besonderen Vorteile des PEL Systems sind:

Unabhängig vom Material:
Grundsätzlich können alle Materialien abgetastet werden die einen Staudruck zulassen. Das PEL-System arbeitet unabhängig von Farbe, Durchsichtigkeit, Oberflächenbeschaffenheit, auf Metall, Kunststoffe, Gummi, Papier, Folien, Kork und Stoff. Das PEL-System ist ein berührungsloses Messsystem. Ein Luftstrahl wirkt mit geringer Kraft auf das Objekt das einen Staudruck erzeugt. ( -6 bis 10g ) Dieser Staudruck wird dann von den PEL Sensoren in ein analoges oder digitales Signal umgesetzt.

Microscope Slides

 

MENZEL microscope slides are available in standard sizes: 1.0 mm thick in dimensions of 26 x 76 mm (ISO Norm 8037/I) Microscope slides with special thicknesses, dimensions and tolerances are also available.

MENZEL microscope slides are manufactured from extra white glass.

Approximate Chemical Composition:

Mean Coefficient of Expansion : 90.6 x 10-7 /ºC (20-300º C)

Strain Point log n 14.5 : 513° C

Softening Littleton Point : 720° C

Four standard product types with different kind of edges fulfill nearly all requirements.

Cut Edges Menzel offers microscope slides with cut edges for routine microscopy applications.   Article Number: cut edges AA00000102E   MENZEL's single or twin frosted slides have consistent and porous surfaces making labelling effortless. The standard slide in this product line has a double frosted area of approx. 20 mm.   Article Number: cut edges, double frosted 20 mm AA00000112E

Ground Edges 90° and 45° The incorporation of ground edges in MENZEL Microscope slides reduces the danger of cuts and infections to laboratory personnel.   Slides with 90º edges are manufactured using a wet grinding process which results in a high quality fine ground edge. These slides are available with or without clipped corners. The standard slides are without clipped corners.   Article Number: Ground edges 90º AG00000102E Ground edges 90º /double frosted 20 mm AG00000112E

Slides with 45º ground edges are with roof ground edges and clipped corners. Microscope Slides with clipped corners are well suited for automated equipment, since they reduce breakage in cassettes or transportation bands.   Article Number: Ground edges 45º AB00000102E Ground edges 45º /double frosted 20 mm AB00000112E   Bevelled edges Another product line in the MENZEL range of microscope slides are MENZEL slides with bevelled edges. The product includes both, a bevelled edge and a 45° ground edge. As with all our microscope slides a smooth and even smear is assured. The standard slides have clipped corners.   Article Number: Bevelled edges AD00000102E Bevelled edges /frosted end 20 mm AD00000112E

weighing terminals    Weighing terminal DK 800 Inligent weighing terminal with high resolution A/D-converter ( 20 Bit ) and LED dot matrix display. Applications: - weight display - measuring converter  - dosing control unit (one or more    components / recipes ) with dosing    coarse/fine ability, tolerance monitoring,    aut. afterflow correction - EU approval /   certificate SWA / SWE / SWT  - OIML approved  - many options such as serial interface,    profibus, 8 control inputs / 16 control    outputs / BCD - output  - analog output ( voltage / current ) - numerous software - options  - NEW !!! MID-certification for automatic   weighing instruments SWA / SWT  Application example

Weighing terminal DK 820 Weighing terminal for gravimetric dosing / same hardware as DK 800 - software - version for gravimetric dosing    and aut. refilling of the weighing container  - high precision continuous dosing because   of high resolution A/D - converter  - profibus available  Application example

Weighing terminal DK 840 / 845 Weighing terminal for belt / screw - weigher applications / same hardware as DK 800 - additional input for speed measuring   ( incremental resolver )  - with erasable and non-erasable totalizer  - with analog and digital outputs (impulse)    being proportional to the throughput  - very precise measuring of throughput /   very precise totalizing - profibus available  Application example

New DK 850 / 860 / 870 / 890 / 895 Family of Weighing TerminalsDK840  DK845   Addition / extension of the proven DK 800 series --> identical operation --> identical design - Casing depth reduced by 50 mm - 24 VDC standard voltage supply - Optional large alibi memory (for certified applications) - Optional Ethernet / Profibus / RS 232 / RS 485 - NEW !!! MID-certification for automatic weighing instruments   SWA / SWT   (valid in any country within Europe) - DK 860 (counting unit) - DK 870 (for loss / gain in weight scales) - DK 890/895 (for belt weighers and weighing screws)

Weighing terminal DK 850DK840 DK845 Special design Check-weigher for start-stop-operation    - MID - certificated - Option Ethernet / Profibus / RS 232 / RS 485 - Analog output available Application example