詳情介紹:
IEC884-1、GB2099.1、VDE0620
低溫沖擊試驗裝置需配合低溫箱使用,使用時與試件置于低溫箱內,經一定時間冷卻后,以規定重量之砝碼,由 100mm 之高度落下,撞擊試件,檢測插頭或線材隔離線內外緣及護套之受損情況。
The test inspection can be executed by means of falling a stipulated hammer (refer to the operation manual) form 100mm height onto the test specimen which laid flat on the steel block and then checking whether there are damages on the insulation cover,sheaths and protective coverings。
低溫沖擊試驗裝置需配合低溫箱使用,使用時與試件置于低溫箱內,經一定時間冷卻后,以規定重量之砝碼,由 100mm 之高度落下,撞擊試件,檢測插頭或線材隔離線內外緣及護套之受損情況。
The test inspection can be executed by means of falling a stipulated hammer (refer to the operation manual) form 100mm height onto the test specimen which laid flat on the steel block and then checking whether there are damages on the insulation cover,sheaths and protective coverings。
沖擊高度 Impact height | 100mm |
落錘重量 Hammer(optional) | 100,200,300,400,500,600, 750,1000,1250,1500g |