YCM-P型上袋機
- 該系統可適用于紙袋、塑料袋等各種包裝材料 , 在化工、飼料、糧食等行業被廣泛使用。
- 可進行 20-50kg 的袋包裝，具有 400-800 袋 / 小時的能力。
- 自動給袋裝置適應高速連續作業。
- 各執行單元均設有控制和安全裝置，實現自動連續運轉。
- 采用 SEW 馬達驅動裝置，可發揮更高效能。
Bag Supplying Machine
- The equipment is widely applied in chemical industry, feed, grain, and other Industries with paper bag, plastic bag, etc.
- The equipment's filling weight is about 20-50kg each bag, and can supply about 400-800 bags/h.
- Automatic supplying bags can be high-speed and continuous.
- Every execution unit includes control & safety device to make theequipment run automatically and continuously.
- The motor manufactured by SEW make the equipment more efficient.
| 型號規格 Model | YCM-P |
| 包裝能力 Capacity | 400-800 bags/ h(根據物料會有所不同) |
| 填充方式 Filling Mode | 1 發 / 1 袋填充 |
| 包裝物料 Applicable Material | 顆粒、片狀、粉料 granular/ flaky/ powde |
| 填充重量 Filling Weight | 20-50 kg/ bag |
| 包裝袋材料 Bag Type | a．紙袋 paper bag b．編織(涂膜)袋 woven bag c. 塑料袋 plastic bag (膜厚 0.2mm) |
| 包裝袋尺寸 Bag Size | 長L(mm)(a)750-950 (b)750-950 (c)550-750 寬 W(mm) 300-520 底寬 H(mm) 75-150 |
| 封口方式 Seal Method | 紙袋：縫紉 / 熱熔膠帶 / 皺紋紙 paper bag: sewing/ hot glue tape/ creped paper 編織袋：折邊 / 縫紉 woven bag: edgefold/ sewing 塑料袋：熱合 plastic bag: heat seal |
| 耗氣量 Air Consumption | 2000 NL/ min |
| 總功率 Power | 8 kW |
| 重量 Weight | 3000 kg |
| 外形尺寸 Overall Dimensions(L*W*H) | 7500×2800×2690 mm |
工作流程
-
自動供袋機
Bag Supplying Machine2個水平排列的置袋盤約可存放200個空袋(存放量會因空袋的厚度而異)，由吸盤取袋裝置給設備供袋。當一個單元的空袋取完后，下一單元的置袋盤自動切換至取袋位置，以設備的連續運轉。
About 200 empty bags are put in 2 horizontal plates (the number of empty bags depends on the bag thickness), and bag supplying is finished by vacuum chuck. After one empty bag taken, the plate with many empty bags moves to the bag fetch position so that the equipment can run continuously and stably.
-
袋位整形
Bag Position Adjustment對袋子的整體位置進行調整。
Adjust the whole position of empty bag.
-
空袋提取
Take Empty Bag提取自動供袋機上空袋。
Take the empty bag of Bag Supplying Machine.
-
橫向移動
Horizontal Movement空袋移動至下料口位置。
Move the empty bag to feed opening.
-
空袋打開
Open Empty Bag空袋移動至下料口位置后，由真空吸盤打開袋口。
Move the empty bag to feed opening, then open the pocket mouth of bag with vacuum chuck.
-
夾袋喂料裝置
Bag Clamping and Feeding Mechanism空袋由夾袋機構夾緊在下料口，下料門插入袋內后打開喂料。
The empty bag is clamped by Bag Clamping Mechanism under the feed opening, then feeding door insert to the bag and start the feeding.
-
過渡料斗+二次料門
Transitional Hopper & Twice Feeding Door料斗為計量機與包裝秤之間的過渡部分，二次料門的主要功能是在下料的過程中起緩沖作用，以減少物料中空氣含量。
The Transitional Hopper is the transitional partbetween the Metering Mechanism and PackagingMachine. The Twice Feeding Door’s main function is tobe a cushion during feeding materials, so that reducethe air content in materials.
-
袋底拍擊裝置
Bag Bottom Flapping Mechanism物料充填后，此裝置拍擊袋底，使袋中的物料充分落實。
After the materials filled the bag, the mechanism claps the bottom of bag to make materials fully drop down the bottom of bag.
-
實袋橫向移動和袋口夾持導入裝置
Bag Horizontal Moving & Pocket Mouth Clamping Mechanism實袋從下料口放至立袋輸送機上，并由袋口夾持裝置夾持著袋口輸送到封口部分。
The bag with materials is put on the Standing BagConveyor from feed opening, and clamped by thePocket Mouth Clamping Mechanism until get to thesealing part.
-
立袋輸送機
Standing Bag Conveyor實袋由此輸送機以恒定的速度輸送到下游，高度調節手柄可調整輸送機的高度。
The bag with materials is conveyed at the samespeed, and the conveyor height can be changedwith height regulating handle.
采購中心
