Publication 1747-UM011G-EN-P - June 2008
Preparing Your Wiring
Layout
Careful wire routing within the enclosure helps to cut down electrical
noise between I/O lines. Follow these rules for routing your wires.
•Route incoming power to the controller by a separate path from
wiring to I/O devices. Where paths must cross, their intersection
should be perpendicular.
•If wiring ducts are used, allow for at least 50.8 mm (2 in.)
between I/O wiring ducts and the controller. If the terminal
strips are used for I/O wiring, allow for at least two inches
between the terminal strips and the controller.
•Limit the cable length for the TTL input module to 15.24 m
(50 ft) per point and 3.05 m (10 ft) per point for the TTL output
module. Use low power dc I/O wiring even though it is less
tolerant to electrical noise.
•Segregate I/O wiring by signal type. Bundle wiring with similar
electrical characteristics together.
Wires with different signal characteristics should be routed into the
enclosure by separate paths. Refer to Allen-Bradley Programmable
Controller Grounding and Wiring Guidelines, publication 1770-4.1.
IMPORTANT
Do not run signal or communication wiring and power
wiring in the same conduit.
ATTENTION
Handle the TTL module by its ends, not metallic
surfaces. Electrostatic discharges can damage the
module. Do not expose the TTL module to electrostatic
charges.
ATTENTION
If the controller is being installed within a potentially hazardous
environment (that is, Class I, Division 2), all wiring must comply
with the requirements stated in the National Electrical Code
501-4 (b).Sidel 4KS-M240/10 伺服驅動器
Sidel 4KS-M240/20 伺服驅動器
Sidel 4KS-M240/30 伺服驅動器
Sidel 4KS-M240/40 伺服驅動器
Sidel 4KS-M240/5 伺服驅動器
Sidel 5000-170/17-B
Sidel 5000-170/25-B
Sidel 5000-170/40-B
Sidel 54K-150/10
Sidel 54K-150/20
Sidel 54K-150/30
Sidel 54K-150/40
Sidel 54K-240/10
Sidel 54K-240/20
Sidel 54K-240/30
Sidel 54K-240/40
Sidel 54K-P150/80-B 電源
Sidel 54K-P240/80-B 電源
Sidel 55K-240/10
Sidel 55K-240/15
Sidel 55K-240/5
Sidel 56WK-P150/80-B 電源
Sidel 56WK-P150/80-B 電源
Sidel 56WK-P240/80-B 電源
Sidel 56WK-P240/80-B 電源
Sidel 5K-200/10-B
Sidel 5K-200/25-B
Sidel 5K-200/35-B
Sidel 60WKS-CE240/12-PB 伺服驅動器
Sidel 60WKS-CE240/22-PB 伺服驅動器
Sidel 60WKS-CE240/26-PB 伺服驅動器
Sidel 60WKS-CE240/6-PB 伺服驅動器
Sidel 60WKS-M240/12-PB 伺服驅動器
Sidel 60WKS-M240/22-PB 伺服驅動器
Sidel 60WKS-M240/26-PB 伺服驅動器
Sidel 60WKS-M240/3-PB 伺服驅動器
Sidel 60WKS-M240/6-PB 伺服驅動器
Sidel 60WKS-M240/6-PB-24 伺服驅動器
Sidel 60WKS-SPA-ESM
Sidel 60WKS-SPA-ESM
Sidel 60WKS-SPA-ESM
Sidel 64WKS-M240/50-RLG 伺服驅動器
Sidel 64WKS-M240/70 伺服驅動器
Sidel 65WKS-M310/12-PB-0 伺服驅動器
Sidel 65WKS-M310/22-PB-0 伺服驅動器
Sidel 65WKS-M310/26-PB-0 伺服驅動器
************1756-IM16I 1756-IM16I 1756-IM16I 1756-IM16I**********************************************
全國zui大的備件庫！---------：張可可
選擇zui有權利的公司！-----：
選擇*的質量！--------
選擇的產品！---------
選擇的服務！------------
選擇zui快的貨期！---------------:
選擇*的價格！------------------:
**************************************************************
Sidel 65WKS-M310/3-PB-0 伺服驅動器
Sidel 65WKS-M310/6-PB-0 伺服驅動器
Sidel 66WKS-M310/35 伺服驅動器
Sidel 66WKS-M310/45 伺服驅動器
Sidel 66WKS-P310/90-B 電源
Sidel 67WKS-M240/3-PB 伺服驅動器
Sidel 67WKS-OPT-B
Sidel AX2001 Beckhoff 伺服驅動器
Sidel AX2003 Beckhoff 伺服驅動器
Sidel AX2006 Beckhoff 伺服驅動器
Sidel AX2010 Beckhoff 伺服驅動器
Sidel AX2020 Beckhoff 伺服驅動器
Sidel Digifas 7003 伺服驅動器
Sidel Digifas 7100/7200
Sidel Digifas 7103 伺服驅動器
Sidel Digifas 7105 伺服驅動器
Sidel Digifas 7108 伺服驅動器
Sidel Digifas 7112 伺服驅動器
采購中心
